Publications
Ren, Z., Heuer, A. H., & Ernst, F. (2019). Ultrahigh-Strength AISI-316 Austenitic Stainless Steel Foils Through Concentrated Interstitial Carbon. Acta Materialia, 167 (), 231-240.
Li, Z., Illing, C., Heuer, A. H., & Ernst, F. (2018). Low-Temperature Carburization of AL-6XN Enabled by Provisional Passivation. Metals, (), 997-1014.
Parikh, H., Hilli, N., De Guire, M. R., Heuer, A. H., Liu, Z., & Goettler, R. (2017). Long-term Microstructural Changes in Solid Oxide Fuel Cell Anodes: 3D Reconstruction. J. Am. Ceram. Soc., 100 (4), 1653–1660.
Zangiabadi, A., Dalton, J., Wang, D., Ernst, F., & Heuer, A. H. (2017). The Formation of Martensitic Austenite during Nitridation of Stainless Steel. Materials Science and Engineering A, 48 (), 8-13.
Kahn, H., Ernst, F., & Heuer, A. H. (2016). Increasing the Coefficient of Sliding Friction of NiCr at Low Loads by Interstitial Surface Hardening. Wear, 346 (), 1-5.
Wang, D., Chen, C., Kahn, H., Ernst, F., & Heuer, A. H. (2016). Isothermal Martensite-to-Austenite Phase Transformation in Interstitially-hardened 17-7PH Stainless Steel. Metallurgical and Materials Transactions A, (), Submitted.
Bouquillon, A., Castaing, J., Barbe, F., Paine, S., Christman, B., Crépin-Leblond, T., ... Heuer, A. H. (2016). Lead-Glazed Rustiques Figulines (Rustic Ceramics) of Bernard Palissy (1510-90) and his Followers: Lead-glazed rustiques figulines of Bernard Palissy and followers. Archaeometry [0003813X], ().
Heuer, A. H., Zahiri Azar, M., Guhl, H., Foulkes, M., Gleeson, B., Nakagawa, T., ... Finnis, M. (2016). The Band Structure of Polycrystalline Al 2 O 3 and its Influence on Transport Phenomena. Journal of the American Ceramic Society [00027820], 99 (3), 733-747.
Guhl, H., Lee, H., Tangney, P., Foulkes, W., Heuer, A. H., Nakagawa, T., ... Finnis, M. (2015). Structural and electronic properties of Sigma 7 grain boundaries in alpha-Al2O3. ACTA MATERIALIA, 99 (), 16-28.
Wu, D., Ge, Y., Kahn, H., Heuer, A. H., & Ernst, F. (2015). Diffusion Profiles after Nitrocarburizing Austenitic Stainless Steel. Surface & Coatings Technology, 279 (), 180-185.
Wang, D., Kahn, H., Ernst, F., & Heuer, A. H. (2015). NiAl Precipitation in Delta Ferrite Grains of 17-7 Precipitation-Hardening Stainless Steel During Low-Temperature Interstitial Hardening. Scripta Materialia, 108 (), 136-140.
Wang, D., Chen, C., Dalton, J., Yang, F., Sharghi-Moshtaghin, R., Kahn, H., ... Heuer, A. H. (2015). “Colossal” Interstitial Supersaturation in Delta Ferrite in Stainless Steels I. Low-Temperature Carburization. Acta Materialia, 86 (), 193-207.
Wang, H., De Guire, M. R., Agnew, G., Goettler, R., Liu, Z., Xing, Z., ... Heuer, A. H. (2014). Manganese oxide formation in lanthanum strontium manganite-yttria-stabilized zirconia SOFC cathodes. Metallurgical and Materials Transactions E: Materials for Energy Systems, 1 (3), 263-271.
Gu, X., Michal, G., Ernst, F., Kahn, H., & Heuer, A. H. (2014). Numerical Simulations of Carbon and Nitrogen Composition–Depth Profiles in Nitrocarburized Austenitic Stainless Steels. Metallurgical and Materials Transactions, 45A (), 4268-4279.
Wu, D., Kahn, H., Michal, G., Ernst, F., & Heuer, A. H. (2014). Orientation Dependence of Nitrogen Supersaturation in Austenitic Stainless Steel During Low-Temperature Gas-Phase Nitriding. Acta Materialia, 79 (), 339-350.
Ge, Y., Ernst, F., Kahn, H., & Heuer, A. H. (2014). The Effect of Surface Finish on Low-Temperature + Acetylene-Based Carburization of 316L Austenitic Stainless Steel. Metallurgical and Materials Transactions A, 45 (), 2338-2345.
Wang, D., Ernst, F., Kahn, H., & Heuer, A. H. (2014). Cellular Precipitation at a 17-7 PH Stainless Steel Interphase Interface during Low-Temperature Nitridation. Metallurgical and Materials Transactions A, 45 (), 1-8.
Gu, X., Michal, G., Ernst, F., Kahn, H., & Heuer, A. H. (2014). Concentration Dependence of Carbon Diffusivity in Austenite. Metallurgical and Materials Transactions A, 45A (), 3790-3799.
Heuer, A. H. (2013). "A 3rd Generation Advanced High-Strength Steel (AHSS) Produced by Dual Stabilization Heat Treatment (DSHT)". , ().
Heuer, A. H. (2013). “On the growth of Al2O3 scales”. , 61 (18), 6670-6683.
Heuer, A. H. (2013). "Fatigue crack growth in interstitially hardened AISI 316L stainless steel. , (107), 100-105.
Heuer, A. H. (2013). "Hardening with Nitrogen for Improved Corrosion Resistance". ADVANCED MATERIALS & PROCESSES , 171 (2), 20-23.
Wang, D., Sharghi-Moshtaghin, R., Ernst, F., & Heuer, A. H. (2013). CBED Study on Delta Ferrite after Low-Temperature Carburization of 17-7 PH Stainless Steel. Metallurgical and Materials Transactions A, (), in preparation.
Hsu, J., Wang, D., Kahn, H., Ernst, F., Michal, G., & Heuer, A. H. (2013). Fatigue Crack Growth of Interstitially Hardened 316L Stainless Steel in Air and 0.6M NaCl. International Journal of Fatigue, 47 (), 100-105.
Li, Z., Ernst, F., & Heuer, A. H. (2013). Improved Accident Tolerance of Austenitic Stainless Steel Cladding through Colossal Supersaturation with Interstitial Solutes. Transactions of the American Nuclear Society, 109 (), 304-306.
Kahn, H., Heuer, A. H., Michal, G., Ernst, F., Sharghi-Moshtaghin, R., Ge, Y., ... Martin, F. (2012). Interstitial Hardening of Duplex 2205 Stainless Steel by Low-Temperature Carburization: Enhanced Mechanical and Electrochemical Performance. Surface Engineering, 28 (), 213-219.
Wang, D., Kahn, H., Lewandowski, J. J., Ernst, F., Michal, G., & Heuer, A. H. (2012). Sustained-Load Crack Growth of Hydrogen-Charged Surface-Hardened 316L Stainless Steel. Materials Science and Engineering A, 556 (), 43-50.
Hsieh, M., Ge, Y., Michal, G., Ernst, F., & Heuer, A. H. (2012). Volatility Diagrams for Cr–O and Cr–Cl and Their Application to Removing the Passive Film from the Surface of Stainless Steel. Metallurgical and Materials Transactions, 43 (), 1187-1201.
Shih, S., Sharghi-Moshtaghin, R., De Guire, M. R., Goettler, R., Xing, Z., Liu, Z., ... Heuer, A. H. (2011). Mn Valence Determination for Lanthanum Strontium Manganite Solid Oxide Fuel Cell Cathodes. J. Electrochem. Soc., 156 (10), B1276-B1280.
Heuer, A. H., Kahn, H., Ernst, F., Michal, G., Hovis, D., Rayne, R., ... Natishan, P. (2011). Enhanced Corrosion Resistance of Interstitially Hardened Stainless Steel: Implications of a Critical Passive Layer Thickness for Breakdown. Acta Materialia, 60 (), 716-725.
Wu, D., Kahn, H., Michal, G., Ernst, F., & Heuer, A. H. (2011). Ferromagnetism in Interstitially Hardened Austenitic Stainless Steel Induced by Low-Temperature Gas-Phase Nitriding. Scripta Materialia, 65 (), 1089-1092.
Ernst, F., Ellis, D., Heuer, A. H., Kahn, H., & Michal, G. (2011). The Carbide M7C3 in Low-Temperature-Carburized Austenitic Stainless Steel. Acta Materialia, 59 (), 2268-2276.
Heuer, A. H., Kahn, H., Ernst, F., Michal, G., Rayne, R., Martin, F., ... Natishan, P. (2010). Carbon-Enhanced Passivity of PH13–8 Mo: A Precipitation-Hardened Martensitic Stainless Steel. Electrochemical and Solid-State Letters C, 13 (), 37-39.
Sharghi-Moshtaghin, R., Ge, Y., Kahn, H., Gu, X., Martin, F., Natishan, P., ... Heuer, A. H. (2010). Low-Temperature Carburization of the Ni-base Superalloy IN718: Improvements in Surface Hardness and Crevice Corrosion Resistance. Metallurgical and Materials Transactions, 41 (), 2022-2032.
O’Donnel, L., Michal, G., Ernst, F., Kahn, H., & Heuer, A. H. (2010). Wear Maps for Low Temperature Carburized 316L Austenitic Stainless Steel Sliding Against Alumina. Surface Engineering, 26 (), 284-292.
Martin, F., Natishan, P., Lemieux, E., Newbauer, T., Rayne, R., Bayles, R., ... Heuer, A. H. (2009). Enhanced Corrosion Resistance of Stainless Steel Carburized at Low Temperature. Metallurgical and Materials Transactions, 40 (), 1805-1809.
Michal, G., Gu, X., Jennings, W., Kahn, H., Ernst, F., & Heuer, A. H. (2009). Paraequilibrium Carburization of Duplex and Ferritic Stainless Steels. Metallurgical and Materials Transactions, 40 (), 1781-1790.
Kahn, H., Michal, G., Ernst, F., & Heuer, A. H. (2009). Poisson Effects on X-ray Diffraction Patterns in Low-Temperature-Carburized Austenitic Stainless Steel. Metallurgical and Materials Transactions, 40 (), 1799-1804.
Ernst, F., Avishai, A., Kahn, H., Gu, X., Michal, G., & Heuer, A. H. (2009). Enhanced Carbon Diffusion in Austenitic Stainless Steel Carburized at Low Temperature. Metallurgical and Materials Transactions A, 40 (), 1768-1780.
Ernst, F., Cao, Y., Michal, G., & Heuer, A. H. (2007). Carbide Precipitation in Austenitic Stainless Steel Carburized at Low-Temperature. Acta Materialia, 55 (), 1895-1906.
Martin, F., Lemieux, E., Newbauer, T., Bayles, R., Natishan, P., Kahn, H., ... Heuer, A. H. (2007). Carburization-Induced Passivity of 316L Austenitic Stainless Steel. Electrochemical and Solid State Letters C, 10 (), 76-78.
Agarwal, N., Kahn, H., Avishai, A., Michal, G., Ernst, F., & Heuer, A. H. (2007). Enhanced Fatigue Resistance in 316L Austenitic Stainless Steel Due to Low-Temperature Paraequilibrium Carburization. Acta Materialia, 55 (), 5572-580.
Heuer, A. H., Ernst, F., Kahn, H., Avishai, A., Michal, G., Pitchure, D., ... Ricker, R. (2007). Interstitial Defects in an Austenitic Stainless Steel Containing “Colossal” Carbon Concentrations: An Internal Friction Study. Scripta Materialia, 56 (), 1067-1070.
Avishai, A., Isheim, D., Seidman, D., Ernst, F., Michal, G., & Heuer, A. H. (2007). Local-Electrode Atom Probe (LEAP™) Tomographic Microanalysis of Low-Temperature Gas-Carburized Austenitic Stainless Steel. Microscopy&Microanalysis, 13 Suppl. 2 (), 1094-1095.
Michal, G., Ernst, F., & Heuer, A. H. (2006). Carbon Paraequilibrium in Austenitic Stainless Steel. Metallurgical and Materials Transactions, 37 (), 1819-1824.
Michal, G., Ernst, F., Kahn, H., Cao, Y., Oba, F., Agarwal, N., ... Heuer, A. H. (2006). Colossal Carbon Supersaturation due to Paraequilibrium Carburization: Stainless Steels with Greatly Improved Mechanical Properties. Acta Materialia, 54 (), 1597-1606.
Ernst, F., Michal, G., Oba, F., Liu, L., Blush, J., & Heuer, A. H. (2006). Gas-Phase Surface Alloying under “Kinetic Control,” A Novel Approach to Improving the Surface Properties of Titanium Alloys. International Journal of Materials Research, 97 (), 597-606.
Liu, L., Ernst, F., Michal, G., & Heuer, A. H. (2005). Surface Hardening of Ti Alloys by Gas-Phase Nitridation: Kinetic Control of the Nitrogen Surface Activity. Metallurgical and Materials Transactions, 36 (), 2429-2434.
Ernst, F., Pirouz, P., & Heuer, A. H. (1991). HRTEM Study of a Cu/Al2O3 Interface. Philosophical Magazine A, 63 (), 259–277.
Ernst, F., Pirouz, P., & Heuer, A. H. (1989). High Resolution Electron Microscopy of an Alumina/Copper Interface. , 138 (), 557–562.